FALCON CARBON
The new Falcon Race is quite simply built for speed. The same board that has taken World Champions Angela Jackson, Olivia Piana and Chase Kosterlitz across the finish line can fly under your feet. With a revolutionary bow shape and adjusted scoop line, the Falcon Race is faster and more stable than ever before.

With a SUP race scene that’s experienced exponential world-wide growth over the last few years, Fanatic has concentrated vast effort into tuning four new race shapes, as well as the two proven 30˝ shapes. Testing was conducted all over the world – from Australia, to Florida, to Maui, to ensure these boards work as well in choppy ocean swell as they do in flat water. Special attention was made to ensure simple, easy foot steering in cross-wind and chop. The rails were designed with a unique goal in mind: to offer stability high on the rail, but reduce wetted surface at the bottom once paddling. The board truly lifts out of the water as you pick up speed, giving you that extra bit of glide to accelerate down the face, up and over the front of the next wave.

The cutting bow has been eliminated, the nose outline was integrated into the new design and is quite a bit wider now.
The new bow design ensures that the nose never catches or develops any self-steering. Added volume prevents the board
from pearling so it always stays above the water. The 2014 Falcon performs in flat water to chop to downwind runners. So all you need to do is match your body weight to the appropriate width Falcon. TECHNOLOGY
CARBON SANDWICH / LIGHT FINISH (CS/LF)
Top quality and high-tech specification Carbon has a perfect weight to stiffness ratio as a result of its very fine weave, plus has fantastic dynamic flex. Used for all Falcon 12´6˝ and 14´0˝ models for maximum stiffness, along with a new matt finish optic for maximum weight
savings.

ONE RACE ACE FIN
The 9.75˝ RaceAce has been developed for race and touring board shapes in any conditions. It’s a fast foil with solid tracking, minimum draft and optimum entry rake angle that glides through weed or kelp. ONE fin technologies utilize high-modulus, pre-impregnated, heat cured, twill leave carbon fiber fabric that creates exceptional strength-to-weightratio and delivers a high-density, impact-resistant ABS edge.

KEY FEATURES
• Drop shape outline with stabilizing square tail and increased nose width
• Domed nose with added volume for quick nose recovery and water dispersion
• Flat angled deck shape for secured stance and water release. Volume pulled out all the way to the rail
• Hard release edges from center to tail, for maximum stability and clean water release
• Clean open deck for easy maneuvering and kick turns
• All models come with the super light ONE 9.75˝ RaceAce fin
• New non-catching bow design
• CAD analyzed surfaces and curve flow

Fittings: ONE RaceAce 9.75”; US Box
Recommended Board Cover: Race 12’6” (381cm) x 32” (81cm)