Welcome, Guest

TOPIC:

Advice needed 19 years 6 months ago #6384

myarz Topic Author Offline Junior Member Posts: 7 Thank you received: 0	Can anyone advice me on whats the best mastik is to use to fill a couple of screw holes as I don`t want to melt the plastic.
	Please Log in or Create an account to join the conversation.

Advice needed 19 years 6 months ago #6386

Jeroen
Offline
Administrator
Posts: 1351
Thank you received: 8

i've used pop rivets on a number of occasions. they exist in waterproof versions as well, but those are hard to find here. i used the normal sort, which are almost waterproof, except in the middle. i filled the middle with some drops of transparent nail polish, but that's just what i happened to have at hand (no pun intended).

there may be better ways, but this worked very well for me (stayed waterproof for years - as long as i owned the boats).

If you're happy, you're successful.

Please Log in or Create an account to join the conversation.

Advice needed 19 years 6 months ago #6389

neilnt Offline Elite Member Posts: 119 Thank you received: 0	I've used aquasure on my playboat which worked well and is still holding up after a whole season of use. As it's clear it also won't make such a mess of your boat as mastic will. Neil www.swiftwaterrescue.at
	Please Log in or Create an account to join the conversation.

Advice needed 19 years 6 months ago #6410

Urge Offline Platinum Member Posts: 760 Thank you received: 0	HOw about blanking screws from a local hardware store take the old screw with you to get the correct size and replace Works well makesure you check them cause any screws can work loose!
	Please Log in or Create an account to join the conversation.